Product Features & Benefits
- Highly durable models
- Long continuous operation at maximum speed
- Outstanding performance in high-precision processes
- No fatigue even from 24-hour, high-cycle operation
- Lightweight arm and the achievement of low inertia
- Fast cycle time of 0.3-second level, and 120 cycles per minute in 24-hour continuous operation
Product Specifications
Arm Length | Full length | 550mm |
---|
First arm | 300mm |
---|
Second arm | 250mm |
---|
Range of Motion | First axis | ±120° |
---|
Second axis | ±145° |
---|
Third axis (Z-axis) | 150mm (option: 300mm) |
---|
Fourth axis (Z-axial rotation) | ±360° |
---|
Maximum Speed | First axis | 375°/s |
---|
Second axis | 600°/s |
---|
Third axis (Z-axis) | 2000mm/s |
---|
Fourth axis (Z-axial rotation) | 2000°/s |
---|
Composite speed | 6.21m/s |
---|
Standard Cycle Time | Horizontal direction: 300 mm Vertical direction: 25 mm, reciprocating | 0.29s *1 (with 2 kg weight) |
---|
Load | Maximum payload | 2kg |
---|
Allowable end moment | 0.01kg·m2 *2 |
---|
Position Repeatability*3 | X, Y (plane surface) | ±0.015mm |
---|
Z-axis (vertical) | ±0.01mm |
---|
Fourth axis (Z-axial rotation) | ±0.02° |
---|
Input Signal for Hand | 8 inputs, 8 outputs |
---|
Air Piping for Hand | φ4×4 |
---|
Position Detection Method | Absolute encoder mode |
---|
Total Weight | Approx. 26kg |
---|
Robot controller cable | Standard: 5m (optional: maximum 25 m) |
---|
Controller | |
---|
*1: Horizontal 300 mm, vertical 25mm, round-trip. Continuous operation is not possible beyond the effective load ratio.
*2: Acceleration/deceleration rates may be limited according to the motion pattern, load mass and amount of offset.
*3: The table shows unidirectional positioning repeatability at constant ambient temperature, but NOT absolute positioning accuracy.
Controller Specifications
| TS3000 Controller |
---|
Series | TH, THP |
---|
Teach Pendant | TP1000, TP3000 |
---|
Power Supply | Single phase 200-240VAC @ 50/60Hz |
---|
Max Power Capacity | 2.3~4.8 kVA |
---|
Dimensions | 290W x 230H x 298D |
---|
Mass | 13kg |
---|
Storage | 256 programs 12800 points 25600 steps |
---|
CE Version | TS3000E + SFB |
---|
USER I/O Count | 32/32 |
---|
SYSTEM I/O Count | 13/10 |
---|
SYSTEM INPUTS | Alarm reset, strobe, program reset, step reset, cycle reset, output reset, start, external servo on, stop, cycle mode, break, low speed, servo off |
---|
SYSTEM OUTPUTS | Servo ready, battery alarm, acknowledge, teach mode on, external mode on, system ready, autorun, alarm, cycle end, low speed on |
---|
Fieldbus SLAVE options | DeviceNet, Profibus, CC-Link, Ethernet I/P, EtherCat, ProfiNet |
---|
Extended I/O Options | TR48-DIOC Module Add 28In/20Out Up to 2 modules can be added to controller |
---|
Communications | RS232C (3), Ethernet (TCP/IP), USB |
---|
Standard SCOL Functions | Torque control (individual axis), gain control (individual axis), interrupt functions, SPURT function, coordinate calculations, payload command, multi-tasking, AREA output function, NCBOY additional axis control, self-diagnostics, pulse output control, conveyor tracking, vision+conveyor tracking |
---|
Optional SCOL Functions | All options included as standard. |
---|
External Control Standard Functions | HOST Protocol, .dll library, LabView integration support |
---|
Click here to download this product's data sheet